Mike

I believe the M31.TDF has to be in the Guide directory also.
But you may want to put the DVD disc in and do a *Install to hard drive* of the
correct file. The re-installed would correct the things missing from your data set.

Not sure which but maybe Deepsky

Larry Wood

>
> do you have the file <guide install directory>\text\M31gc.dat on your
> computer? If not, the dataset is missing from your install. I haven't got
> the DVD on hand right now, but would expect you to be able to find the file
> on your install disc. Just copy it to the "text" directory of your Guide
> installation.
>
> Arild :)
>
>
>
> On Thu, Oct 10, 2013 at 5:25 AM, <Ldstryker@...> wrote:
>
>> **
>>
>>
>> Mike,
>>
>> Sounds like the extras didn't install correctly.
>>
>> Paul..
>> -----Original Message-----
>> From: Mike Stewart <mike.n0tu@...>
>> To: guide-user <guide-user@yahoogroups.com>
>> Sent: Wed, Oct 9, 2013 11:03 pm
>> Subject: RE: [guide-user] Toggle User Datasets Question
>>
>>
>> Paul,
>>
>> That’s one of the anomalies. There is no “ * “ next to M31 Globular
>> clusters in the User dataset list. Nor do I see a “ * “ next to Quasars,
>> Pulsars, or many of the other listings.
>>
>> There are M31.TDF, M31.IDF, and m31gc.dat files in the guide9/text folder.
>>
>> Hot pink is the color selected as a default.
>>
>> Mike
>>
>> From: guide-user@yahoogroups.com [mailto:guide-user@yahoogroups.com<guide-user@yahoogroups.com?>]
>> On Behalf Of Ldstryker@...
>> Sent: Wednesday, October 9, 2013 9:31 PM
>> To: guide-user@yahoogroups.com
>> Subject: Re: [guide-user] Toggle User Datasets Question
>>
>> Just be sure there is an " * " near the data set you choose. also I have
>> done this a few times and picked a color that blended into the chart..
>> Method I did was Adjust Dataset turn " on " picked hot pink for a color.
>> clicked "ok" and then clicked "done"
>>
>> Paul..
>>
>> -----Original Message-----
>> From: Mike Stewart <mike.n0tu@...>
>> To: guide-user <guide-user@yahoogroups.com>
>> Sent: Wed, Oct 9, 2013 10:21 pm
>> Subject: RE: [guide-user] Toggle User Datasets Question
>>
>> Both of your reports lead me to believe something else is amiss in either
>> the install or another, related configuration setting. Problem is, I’m not
>> smart enough to figure out what’s not right. When discovered, it will be a
>> “duh” moment, I’m sure. Thanks for taking a look at your system to check.
>>
>> Best,
>>
>> Mike
>>
>> From: guide-user@yahoogroups.com <mailto:guide-user@yahoogroups.com><guide-user@yahoogroups.com%3E?>;
>> [mailto:guide-user@yahoogroups.com <guide-user@yahoogroups.com?> <
>> mailto:guide-user@yahoogroups.com?> <guide-user@yahoogroups.com?%3E>; ]
>> On Behalf Of Ldstryker@... <mailto:Ldstryker@...><Ldstryker@...%3E?>;
>>
>> Sent: Wednesday, October 9, 2013 9:15 PM
>> To: guide-user@yahoogroups.com <mailto:guide-user@yahoogroups.com><guide-user@yahoogroups.com%3E?>;
>>
>> Subject: Re: [guide-user] Toggle User Datasets Question
>>
>> I just tried it myself and it works perfectly using the method above.
>>
>> Paul...
>>
>> -----Original Message-----
>> From: Mike Stewart <mike.n0tu@... <mailto:mike.n0tu@...><mike.n0tu@...%3E?>;
>>>
>> To: guide-user <guide-user@yahoogroups.com <
>> mailto:guide-user@yahoogroups.com> <guide-user@yahoogroups.com%3E?>; >
>> Sent: Wed, Oct 9, 2013 10:09 pm
>> Subject: RE: [guide-user] Toggle User Datasets Question
>>
>> Mati,
>>
>> That is the sequence I’ve used--with no luck. The clusters don’t appear on
>> the chart. Changing levels doesn’t help, either.
>>
>> By the way, I have tried with the M31 images on and off. Neither way works.
>>
>> Mike
>>
>> From: guide-user@yahoogroups.com <mailto:guide-user@yahoogroups.com><guide-user@yahoogroups.com%3E?>;
>> [mailto:guide-user@yahoogroups.com <guide-user@yahoogroups.com?> <
>> mailto:guide-user@yahoogroups.com?> <guide-user@yahoogroups.com?%3E>; ]
>> On Behalf Of Mati Morel
>> Sent: Wednesday, October 9, 2013 9:02 PM
>> To: guide-user@yahoogroups.com <mailto:guide-user@yahoogroups.com><guide-user@yahoogroups.com%3E?>;
>>
>> Subject: Re: [guide-user] Toggle User Datasets Question
>>
>> I’ve tried it myself, and it works fine. To be sure you haven’t skipped
>> anything, in the dialog box for <M31 Globular Clusters>, do the following
>>
>> click “on”, then
>>
>> click “OK”.
>>
>> This will take you back to the previous dialog box, then
>>
>> click on “Done”.
>>
>> Nothing more to do.
>>
>> Regards,
>>
>> Mati Morel
>> Variable Stars South
>> mmorel7@... <mailto:mmorel7@...> <mmorel7@...%3E?>;
>>
>>
>> [Non-text portions of this message have been removed]
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>