Roger Pickard Oct 23 9:54 AM
----- Original Message -----
From: <owen@...>
To: <guide-user@yahoogroups.com>
Sent: Tuesday, October 23, 2012 4:50 PM
Subject: Re: [guide-user] Re: Getting UCAC4 to show up in Guide
Hi Roger
it is www.projectpluto.com/new.htm Although it says the last
changes were in April the update of the program is May 25th when you
download the update.
Owen
----- Original Message -----
From: guide-user@yahoogroups.com
To:
Cc:
Sent:Tue, 23 Oct 2012 13:19:36 +0100
Subject:Re: [guide-user] Re: Getting UCAC4 to show up in Guide
And where does one find that update please Owen.
Roger
----- Original Message -----
From: "Owen Brazell"
To:
Sent: Tuesday, October 23, 2012 12:20 AM
Subject: RE: [guide-user] Re: Getting UCAC4 to show up in Guide
>I would also make sure you have the latest update of Guide 9 dated
>May. I
> had a similar issue until I updated.
>
>
>
> Owen
>
>
>
> From: guide-user@yahoogroups.com [3]
[mailto:guide-user@yahoogroups.com [4]]
> On
> Behalf Of pastorgalactico
> Sent: 22 October 2012 11:30 PM
> To: guide-user@yahoogroups.com [5]
> Subject: Re: [guide-user] Re: Getting UCAC4 to show up in Guide
>
>
>
>
>
> Hello;
>
> Already you work or not?
> And of course in your case it would asymptomatic;
> UCAC4_PATH=d:guide9ucac4
>
> greetings;
>
> J.Tapioles
>
> ----- Original Message -----
> From: afm038
> To: guide-user@yahoogroups.com [6]
> Sent: Tuesday, October 23, 2012 12:22 AM
> Subject: [guide-user] Re: Getting UCAC4 to show up in Guide
>
> There are definitely no spaces in the path. It is written in
> guide.dat
> exactly as below (note that my guide9 folder is in the root
> directory of the
> d drive)
>
> UCAC4_PATH=d:guide9ucac4
>
> Thanks, Andy
>
> --- In guide-user@yahoogroups.com [7]
> ,
> "pastorgalactico" wrote:
>>
>> Hello;
>> That's what happened to me until I discovered that everything
devia
>> it
> should not have spaces in it;
>>
>> Well no spaces;
>> UCAC4_PATH=c:guide9ucac4
>>
>> Mal with spaces;
>> UCAC4_PATH = c: guide9 ucac4
>>
>> Acerme if I had the same problem.
>>
>> greetings;
>>
>> J.Tapioles
>>
>> ----- Original Message -----
>> From: afm038
>> To: guide-user@yahoogroups.com [8]
>>
>> Sent: Monday, October 22, 2012 10:19 PM
>> Subject: [guide-user] Re: Getting UCAC4 to show up in Guide
>>
>>
>>
>> Exactly what I've done and described in my earlier post - but no
>> ucac4
> stars are shown.
>>
>> Thanks, Andy
>>
>> --- In guide-user@yahoogroups.com [9]
>> ,
> "pastorgalactico" wrote:
>> >
>> > Hello;
>> >
>> > Be in the folder you just have to put ucac4 all files from z001
>> > to z900
> and nothing more.
>> > Then you have to put in guide.dat end this;
>> >
>> > UCAC4_PATH=c:guide9ucac4
>> >
>> > Hope this helps
>> > No need to take off your ucac3 if you want.
>> > greetings;
>> >
>> > J.Tapioles
>> >
>> > ----- Original Message -----
>> > From: afm038
>> > To: guide-user@yahoogroups.com [10]
>> >
>> > Sent: Monday, October 22, 2012 8:48 PM
>> > Subject: [guide-user] Re: Getting UCAC4 to show up in Guide
>> >
>> >
>> >
>> > Ok so I'm struggling here, I've followed all the instructions
and
>> > cannot
> see any UCAC4 data.
>> >
>> > I've put the ucac4.tdf file in the Guide 9 directory, I've got
>> > all 900
> UCAC4 Z***.bin files in the UCAC4 directory, I've got all the u4i
> files in a
> sub directory from UCAC4 and I've put the correct UCAC4 directory
> path in
> the guide.dat file.
>> > I've turned off UCAC3 so these now do not show and complicate
>> > things,
> I've turned on UCAC4 in the Extras - Toggle user datasets (tried
on,
> fixed
> and auto) but still I do not see any UCAC4 data displayed ?
>> >
>> > Have I missed something ? Any help would be gratefully received.
>> >
>> > Thanks, Andy
>> >
>> > --- In guide-user@yahoogroups.com [11]
>> >
> , Bill J Gray wrote:
>> > >
>> > >
>> > >
>> > > pastorgalactico wrote:
>> > >
>> > > > If you remove the folder ucac3 guide9.0 works only with
ucac4
>> > > > and
>> > > > is not necessary to have the folder inside guide ucac3 9.0
>> > > > At least so far has not noticed anything unusual in the
>> > > > operation
>> > > > guide 9.0 without being ucac3 folder and running the ucac4.
>> > >
>> > > Exactly. This is almost what would happen if, in Extras...
>> > > Install
>> > > To Hard Drive, you turned off (or never bothered to turn on)
>> > > the
> "UCAC-3"
>> > > option at the bottom of the list of things to be installed.
>> > > Guide
> tends
>> > > to assume that some files may not be available to it; in
>> > > particular,
> if
>> > > you've done a "minimum install", only about 12 MBytes are
>> > > copied to
> the
>> > > hard drive.
>> > >
>> > > But I'd recommend leaving the UCAC-3 files in place. You will
>> > > probably
>> > > find that if you try to display UCAC-4 at a wide field of view
> (several
>> > > degrees), it will be somewhat slow. Guide's version of UCAC-3
>> > > is
> compressed,
>> > > and extra files are provided for use at wider fields of view.
>> > >
>> > > > Another thing I'm thinking if you could get in the USNO A2
>> > > > guide 9.0
>> > > > full guide 9.0. and have the option of disabling it whenever
> desired.
>> > >
>> > > One _can_ display A2.0 (or B1.0) in Guides 7, 8 and 9 :
>> > >
>> > > http://www.projectpluto.com/update7.htm#ax0_direct [12]
>> > >
>> > > But it's well to use this only when looking for very faint
>> > > stars.
>> > > A2.0 and B1.0 go much fainter than UCAC, but the quality of
the
>> > > data
> is
>> > > much poorer.
>> > >
>> > > -- Bill
>> > >
>> >
>> >
>> >
>> >
>> >
>> > --
>> > I am using the free version of SPAMfighter.
>> > SPAMfighter has removed 1193 of my spam emails to date.
>> > Get the free SPAMfighter here: http://www.spamfighter.com/len
[13]
>> >
>> > Do you have a slow PC? Try Free scan
> http://www.spamfighter.com/SLOW-PCfighter?cid=sigen [14]
>> >
>> >
>> > [Non-text portions of this message have been removed]
>> >
>>
>>
>>
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> To unsubscribe from this group, send an empty email to:
> guide-user-unsubscribe@egroups.comYahoo [15]! Groups Links
>
>
>
Links:
------
[1] mailto:owen%40online.rednet.co.uk
[2] mailto:guide-user%40yahoogroups.com
[3] mailto:guide-user%40yahoogroups.com
[4] mailto:guide-user%40yahoogroups.com
[5] mailto:guide-user%40yahoogroups.com
[6] mailto:guide-user%40yahoogroups.com
[7] mailto:guide-user%40yahoogroups.com
[8] mailto:guide-user%40yahoogroups.com
[9] mailto:guide-user%40yahoogroups.com
[10] mailto:guide-user%40yahoogroups.com
[11] mailto:guide-user%40yahoogroups.com
[12] http://www.projectpluto.com/update7.htm#ax0_direct
[13] http://www.spamfighter.com/len
[14] http://www.spamfighter.com/SLOW-PCfighter?cid=sigen
[15] mailto:guide-user-unsubscribe%40egroups.comYahoo
[16]
http://groups.yahoo.com/group/guide-user/post;_ylc=X3oDMTJwN3ZyNmppBF9TAzk3MzU5NzE0BGdycElkAzE0MTI0MjIEZ3Jwc3BJZAMxNzA1MDgyODA1BG1zZ0lkAzkxNTAEc2VjA2Z0cgRzbGsDcnBseQRzdGltZQMxMzUwOTk0NzY3?act=reply&messageNum=9150
[17]
mailto:roger.pickard@...?subject=Re%3A%20%5Bguide-user%5D%20Re%3A%20Getting%20UCAC4%20to%20show%20up%20in%20Guide
[18]
mailto:guide-user@yahoogroups.com?subject=Re%3A%20%5Bguide-user%5D%20Re%3A%20Getting%20UCAC4%20to%20show%20up%20in%20Guide
[19]
http://groups.yahoo.com/group/guide-user/post;_ylc=X3oDMTJlNzBlZTVrBF9TAzk3MzU5NzE0BGdycElkAzE0MTI0MjIEZ3Jwc3BJZAMxNzA1MDgyODA1BHNlYwNmdHIEc2xrA250cGMEc3RpbWUDMTM1MDk5NDc2Nw--
[20]
http://groups.yahoo.com/group/guide-user/message/9087;_ylc=X3oDMTM0MDZqNXFkBF9TAzk3MzU5NzE0BGdycElkAzE0MTI0MjIEZ3Jwc3BJZAMxNzA1MDgyODA1BG1zZ0lkAzkxNTAEc2VjA2Z0cgRzbGsDdnRwYwRzdGltZQMxMzUwOTk0NzY3BHRwY0lkAzkwODc-
[21]
http://groups.yahoo.com/group/guide-user;_ylc=X3oDMTJldW82Y3RhBF9TAzk3MzU5NzE0BGdycElkAzE0MTI0MjIEZ3Jwc3BJZAMxNzA1MDgyODA1BHNlYwN2dGwEc2xrA3ZnaHAEc3RpbWUDMTM1MDk5NDc2Nw--
[22]
http://groups.yahoo.com/;_ylc=X3oDMTJkNnJkc3Q1BF9TAzk3MzU5NzE0BGdycElkAzE0MTI0MjIEZ3Jwc3BJZAMxNzA1MDgyODA1BHNlYwNmdHIEc2xrA2dmcARzdGltZQMxMzUwOTk0NzY3
[23]
mailto:guide-user-traditional@yahoogroups.com?subject=Change%20Delivery%20Format:%20Traditional
[24]
mailto:guide-user-digest@yahoogroups.com?subject=Email%20Delivery:%20Digest
[25] mailto:guide-user-unsubscribe@yahoogroups.com?subject=Unsubscribe
[26] http://docs.yahoo.com/info/terms/
[27]
mailto:ygroupsnotifications@yahoogroups.com?subject=Feedback%20on%20the%20redesigned%20individual%20mail%20v1
[Non-text portions of this message have been removed]
------------------------------------
To unsubscribe from this group, send an empty email to:
guide-user-unsubscribe@egroups.comYahoo! Groups Links
[Non-text portions of this message have been removed]