pastorgalactico Oct 12 6:46 PM
--- In guide-user@yahoogroups.com, Denis <boucherd@...> wrote:
>
> UCAC4_PATH=c:\guide9\ucac4
>
> if all the files (900) are in folder ucac4 then add the above line after
> the last line in "guide.dat" file.
>
> Denis
>
> On 12/10/2012 5:41 PM, pastorgalactico wrote:
> > Hello;
> > I followed all the steps you mentioned and still missing ucac4 the guide 9.0
> > I do not understand is this;
> > UCAC4_PATH = c: \ guide9 \ ucac4 \ u4b.AAA
> > What are these 3 A?
> > 3 to me since I have not.
> > Of all the ways still not working.
> >
> > J.Tapioles
> >
> > Hola;
> > He seguido todos los pasos que has mencionado y el ucac4 sigue sin aparecer en el guide 9.0
> > Lo que no entiendo es esto;
> > UCAC4_PATH = c: \ guide9 \ ucac4 \ u4b.AAA
> > ¿Que son estas 3 A?
> > Las 3 A yo no las he puesto.
> > De todas las maneras sigue sin funcionar.
> >
> > J.Tapioles
> >
> >
> > --- In guide-user@yahoogroups.com, John Farrell <jafarrell2001@> wrote:
> >>
> >> I had no problems with getting UCAC4 working. You do need to have Guide 9. I keep all my astronomical catalogs in a separate folder because many of them are used by more than one application but you can put the UCAC4 folder anywhere you like.Â
> >> Â
> >> I created a new, UCAC4 folder in my Astronomical Catalogs folder and copied both sided of the DVD into it. One side of the DVD has a U4b folder containing Zones 1-379. There are also a number of other folders on this side that are probably not needed but I copied them anyway.  The remaining zones (380-910) are on the second side of the DVD in a U4b folder and will be copied into the U4b folder on your hard drive also. When you are done, your U4b folder should contain all of the zone files, Z001 - Z910.
> >> Â
> >> Next, set the the tdf path to point to your UCAC4 folder. Mine looks like this: UCAC4_PATH=c:\Users\John\Documents\Astronomical Catalogs\UCAC4\u4b.  Â
> >>
> >> Finally, use Extras/Toggle user data sets to turn on UCAC4 and adjust it however you want it.Â
> >>
> >> John
> >>
> >>
> >>
> >>
> >> ________________________________
> >> From: pastorgalactico <pastorgalactico@>
> >> To: guide-user@yahoogroups.com
> >> Sent: Friday, October 12, 2012 9:18 AM
> >> Subject: Re: [guide-user] Re: Getting UCAC4 to show up in Guide
> >>
> >>
> >> Â
> >>
> >> I have proven in every way and does not work.
> >> Can you tell me step by step what I have to do from the 2 dvd to put them in the folder 9.0Esto guide tells me is what the help guide 9.0
> >>
> >> Project Pluto
> >> 168 Ridge Road
> >> Bowdoinham, Maine 04008
> >>
> >> Phone (207) 666 5750
> >> (800) 777 5886 (1-800-PRPLUTO)
> >> Fax (207) 666 3149
> >> Internet mailto:pluto%40projectpluto.com
> >> http://www.projectpluto.com
> >>
> >> Support is available from 8 AM to 7 PM EST
> >> (13.00 to 24.00 UT).
> >>
> >> GUIDE Version 1.0 was released in April 1993;
> >> version 2.0, in July 1993, version 3.0, in May 1994;
> >> Version 4.0, in July 1995, version 5.0, August 1996;
> >> Version 6.0, in September 1997, and version 7.0,
> >> in November 1998.
> >>
> >> You are running the version of 25 May 2012. The Spanish files
> >> are the version of 6 December 2001.
> >> Lo he provado de todas las maneras y no funciona.
> >> Me podrias decir paso a paso lo que tengo que hacer desde los 2 dvd para meterlos en la carpeta del guide 9.0Esto es lo que me dice la ayuda de guide 9.0
> >>
> >> Project Pluto
> >> 168 Ridge Road
> >> Bowdoinham, Maine 04008
> >>
> >> Telefono (207) 666 5750
> >> (800) 777 5886 (1-800-PRPLUTO)
> >> Fax (207) 666 3149
> >> Internet mailto:pluto%40projectpluto.com
> >> http://www.projectpluto.com/
> >>
> >> El soporte esta disponible de 8 AM a 7 PM hora del Este
> >> (13.00 a 24.00 TU).
> >>
> >> La version 1.0 de GUIDE fue lanzada en Abril 1993;
> >> la version 2.0, en Julio 1993; la version 3.0, en Mayo 1994;
> >> la version 4.0, en Julio 1995; la version 5.0, Agosto 1996;
> >> la version 6.0, en Septiembre 1997, y la version 7.0,
> >> en Noviembre 1998.
> >>
> >> Estas ejecutando la version del 25 May 2012. The Spanish files
> >> are la version del 6 de Dic del 2001.
> >>
> >> ----- Original Message -----
> >> From: Bill J Gray
> >> To: mailto:guide-user%40yahoogroups.com
> >> Sent: Friday, October 12, 2012 5:00 PM
> >> Subject: Re: [guide-user] Re: Getting UCAC4 to show up in Guide
> >>
> >> Hmmm... a few comments here:
> >>
> >> Don't worry about the u4i folder. The only part of it Guide uses is the
> >> file 'u4index.asc', and it doesn't even really need that. (If it's available,
> >> UCAC4 will be displayed a little bit faster. I only notice the difference
> >> when displaying UCAC4 straight from the DVD, something I doubt most people
> >> will do, except maybe to test out UCAC4 use.)
> >>
> >> In Extras... Toggle User Datasets (Otros datas de usuario), do you
> >> see a "UCAC4" option? Is it turned on, with Shown At (Mostrar de) set
> >> to, say, 0 to 5 degrees?
> >>
> >> When you click on Help... About Guide, the last couple of lines should
> >> give the version date ("estas ejecutando la version del...") What version
> >> date do you see?
> >>
> >> I have a feeling I'll be getting a lot of questions about UCAC4... I'm
> >> thinking of ways to make it a little easier to use in Guide.
> >>
> >> -- Bill
> >>
> >> --
> >> I am using the free version of SPAMfighter.
> >> SPAMfighter has removed 1061 of my spam emails to date.
> >> Get the free SPAMfighter here: http://www.spamfighter.com/len
> >>
> >> Do you have a slow PC? Try Free scan http://www.spamfighter.com/SLOW-PCfighter?cid=sigen
> >>
> >> [Non-text portions of this message have been removed]
> >>
> >>
> >>
> >>
> >> [Non-text portions of this message have been removed]
> >>
> >
> >
> >
> >
> > ------------------------------------
> >
> > To unsubscribe from this group, send an empty email to:
> > guide-user-unsubscribe@...! Groups Links
> >
> >
> >
> >
>