I think it should be just U4b.  I have no idea where .AAA came from.  Try deleting it.
 
If this doesn't work, I hope Bill can come up with something.  Perhaps there is a problem with the Spanish version.
 
Bueno suerte.
 
John


________________________________
From: pastorgalactico <pastorgalactico@...>
To: guide-user@yahoogroups.com
Sent: Friday, October 12, 2012 5:41 PM
Subject: [guide-user] Re: Getting UCAC4 to show up in Guide



 

Hello;
I followed all the steps you mentioned and still missing ucac4 the guide 9.0
I do not understand is this;
UCAC4_PATH = c: \ guide9 \ ucac4 \ u4b.AAA
What are these 3 A?
3 to me since I have not.
Of all the ways still not working.

J.Tapioles

Hola;
He seguido todos los pasos que has mencionado y el ucac4 sigue sin aparecer en el guide 9.0
Lo que no entiendo es esto;
UCAC4_PATH = c: \ guide9 \ ucac4 \ u4b.AAA
¿Que son estas 3 A?
Las 3 A yo no las he puesto.
De todas las maneras sigue sin funcionar.

J.Tapioles

--- In mailto:guide-user%40yahoogroups.com, John Farrell <jafarrell2001@...> wrote:
>
> I had no problems with getting UCAC4 working.  You do need to have Guide 9.  I keep all my astronomical catalogs in a separate folder because many of them are used by more than one application but you can put the UCAC4 folder anywhere you like. 
>  
> I created a new, UCAC4 folder in my Astronomical Catalogs folder and copied both sided of the DVD into it.  One side of the DVD has a U4b folder containing Zones 1-379.  There are also a number of other folders on this side that are probably not needed but I copied them anyway.  The remaining zones (380-910) are on the second side of the DVD in a U4b folder and will be copied into the U4b folder on your hard drive also.  When you are done, your U4b folder should contain all of the zone files, Z001 - Z910.
>  
> Next, set the the tdf path to point to your UCAC4 folder.  Mine looks like this: UCAC4_PATH=c:\Users\John\Documents\Astronomical Catalogs\UCAC4\u4b.   
>
> Finally, use Extras/Toggle user data sets to turn on UCAC4 and adjust it however you want it. 
>
> John
>
>
>
>
> ________________________________
> From: pastorgalactico <pastorgalactico@...>
> To: mailto:guide-user%40yahoogroups.com
> Sent: Friday, October 12, 2012 9:18 AM
> Subject: Re: [guide-user] Re: Getting UCAC4 to show up in Guide
>
>
>  
>
> I have proven in every way and does not work.
> Can you tell me step by step what I have to do from the 2 dvd to put them in the folder 9.0Esto guide tells me is what the help guide 9.0
>
> Project Pluto
> 168 Ridge Road
> Bowdoinham, Maine 04008
>
> Phone (207) 666 5750
> (800) 777 5886 (1-800-PRPLUTO)
> Fax (207) 666 3149
> Internet mailto:pluto%40projectpluto.com
> http://www.projectpluto.com
>
> Support is available from 8 AM to 7 PM EST
> (13.00 to 24.00 UT).
>
> GUIDE Version 1.0 was released in April 1993;
> version 2.0, in July 1993, version 3.0, in May 1994;
> Version 4.0, in July 1995, version 5.0, August 1996;
> Version 6.0, in September 1997, and version 7.0,
> in November 1998.
>
> You are running the version of 25 May 2012. The Spanish files
> are the version of 6 December 2001.
> Lo he provado de todas las maneras y no funciona.
> Me podrias decir paso a paso lo que tengo que hacer desde los 2 dvd para meterlos en la carpeta del guide 9.0Esto es lo que me dice la ayuda de guide 9.0
>
> Project Pluto
> 168 Ridge Road
> Bowdoinham, Maine 04008
>
> Telefono (207) 666 5750
> (800) 777 5886 (1-800-PRPLUTO)
> Fax (207) 666 3149
> Internet mailto:pluto%40projectpluto.com
> http://www.projectpluto.com/
>
> El soporte esta disponible de 8 AM a 7 PM hora del Este
> (13.00 a 24.00 TU).
>
> La version 1.0 de GUIDE fue lanzada en Abril 1993;
> la version 2.0, en Julio 1993; la version 3.0, en Mayo 1994;
> la version 4.0, en Julio 1995; la version 5.0, Agosto 1996;
> la version 6.0, en Septiembre 1997, y la version 7.0,
> en Noviembre 1998.
>
> Estas ejecutando la version del 25 May 2012. The Spanish files
> are la version del 6 de Dic del 2001.
>
> ----- Original Message -----
> From: Bill J Gray
> To: mailto:guide-user%40yahoogroups.com
> Sent: Friday, October 12, 2012 5:00 PM
> Subject: Re: [guide-user] Re: Getting UCAC4 to show up in Guide
>
> Hmmm... a few comments here:
>
> Don't worry about the u4i folder. The only part of it Guide uses is the
> file 'u4index.asc', and it doesn't even really need that. (If it's available,
> UCAC4 will be displayed a little bit faster. I only notice the difference
> when displaying UCAC4 straight from the DVD, something I doubt most people
> will do, except maybe to test out UCAC4 use.)
>
> In Extras... Toggle User Datasets (Otros datas de usuario), do you
> see a "UCAC4" option? Is it turned on, with Shown At (Mostrar de) set
> to, say, 0 to 5 degrees?
>
> When you click on Help... About Guide, the last couple of lines should
> give the version date ("estas ejecutando la version del...") What version
> date do you see?
>
> I have a feeling I'll be getting a lot of questions about UCAC4... I'm
> thinking of ways to make it a little easier to use in Guide.
>
> -- Bill
>
> --
> I am using the free version of SPAMfighter.
> SPAMfighter has removed 1061 of my spam emails to date.
> Get the free SPAMfighter here: http://www.spamfighter.com/len
>
> Do you have a slow PC? Try Free scan http://www.spamfighter.com/SLOW-PCfighter?cid=sigen
>
> [Non-text portions of this message have been removed]
>
>
>
>
> [Non-text portions of this message have been removed]
>




[Non-text portions of this message have been removed]