Re: [guide-user] Re: UCAC4

tom Oct 8 7:02 AM

Denis,
where does the UCAC4.tdf file come from? I have no equivalent for UCAC3...

Tom

----- Original Message -----
From: "Denis" <boucherd@...>
To: <guide-user@yahoogroups.com>
Sent: Monday, October 08, 2012 9:53 AM
Subject: Re: [guide-user] Re: UCAC4


>A couple of things are needed. First one is to make sure you have the
> UCAC4.tdf file in your Guide directory. Go to user data set and turn it
> on. Open Guide.dat file and enter on the last line -
> UCAC4_PATH=c:\guide9\ucac4 (replace path with your directory) or enter
> control-j and enter the line above with your own path.
>
> Denis
>
>
>
> On 08/10/2012 6:34 AM, franksmith0519 wrote:
>>
>>
>> I'm interested in UCAC4 also.
>>
>> I tried hitting Control-J and editing the .dat folder after adding UCAC4
>> to my hard drive. It did not work.
>>
>> Hope Bill works on this at least as an option
>>
>> Regards,
>>
>> Frank
>>
>>
>>
>> --- In guide-user@yahoogroups.com, Denis <boucherd@...> wrote:
>>>
>>> Bill,
>>>
>>> Are you planning to take the UCAC4 permanently into Guide 9? With all
>>> the improvements, it would be worth to create the a new Guide 9 set of
>>> files as you did for UCAC3. The best way would be to create codes to
>>> convert UCAC4 to Guide 9 format and use the resulting files to replace
>>> the UCAC3 360 files.
>>>
>>> If I had the codes I would give it a try. Are the codes to access the
>>> reformatted ucac3 in guide 9 available?
>>>
>>>
>>> It would be valuable for those with the UCAC4 DVD.
>>>
>>>
>>> Denis
>>>
>>
>>
>>
>>
>> ------------------------------------
>>
>> To unsubscribe from this group, send an empty email to:
>> guide-user-unsubscribe@egroups.comYahoo! Groups Links
>>
>>
>>
>>
>
>
> ------------------------------------
>
> To unsubscribe from this group, send an empty email to:
> guide-user-unsubscribe@egroups.comYahoo! Groups Links
>
>
>