Hi,
I also have set my horizon.dat to the following. It produce a Line with the meridian. You can set you personal horizon dates in:
; HORIZON.DAT Hammerichstr_Oben-- Definition file for horizon
; See end of HORIZON.DAT for description
;
; See the end of this file for a description of how the 'hor' command works
hor 10 10 10 ; obere Begrenzung des Sichtfensters, hellgrau Hammerichstra�e
0 0
0 55.0
2 59.0
4 61.0
6 62.0
8 66.0
10 70.0
12 71.0
14 71.0
16 72.0
18 73.0
20 74.0
22 75.0
24 75.0
26 76.0
28 76.0
30 78.0
32 78.0
34 78.0
36 78.0
38 78.0
40 78.0
42 79.0
44 79.0
46 79.0
48 80.0
50 80.0
52 80.0
54 80.0
56 80.0
58 80.0
60 80.0
62 80.0
64 80.0
66 80.0
68 80.0
70 81.0
72 81.0
74 81.0
76 81.0
78 81.0
80 81.0
82 81.0
84 81.0
86 81.0
88 81.0
90 81.0
92 81.0
94 81.0
96 81.0
98 80.0
100 80.0
102 80.0
104 80.0
106 80.0
108 80.0
110 80.0
112 80.0
114 79.0
116 78.0
118 78.0
120 78.0
122 78.0
124 77.0
126 77.0
128 76.0
130 75.0
132 74.0
134 73.0
136 73.0
138 72.0
140 72.0
142 72.0
144 71.0
146 71.0
148 70.0
150 69.0
152 65.0
154 63.0
156 61.0
158 44.0
160 40.0
162 35.0
164 30.0
166 26.0
168 20.0
170 18.0
172 19.0
174 20.0
176 20.0
178 23.0
180 24.0
182 24.0
184 24.0
186 24.0
188 23.0
190 23.0
192 23.0
194 25.0
196 27.0
198 29.0
200 30.0
202 31.0
204 31.0
206 32.0
208 32.0
210 32.0
212 32.0
214 33.0
216 33.0
218 33.0
220 32.0
222 32.0
224 32.0
226 31.0
228 31.0
230 31.0
232 29.0
234 28.0
236 28.0
238 29.0
240 30.0
242 31.0
244 31.0
246 30.0
248 30.0
250 30.0
252 31.0
254 32.0
256 31.0
258 31.0
260 32.0
262 32.0
264 30.0
266 28.0
268 24.0
270 21.0
272 20.0
274 27.0
276 28.0
278 29.0
280 30.0
282 30.0
284 30.0
286 30.0
288 31.0
290 32.0
292 33.0
294 33.0
296 34.0
298 33.0
300 32.0
302 30.0
304 28.0
306 27.0
308 25.0
310 23.0
312 16.0
314 12.0
316 10.0
318 10.0
320 12.0
322 13.0
324 14.0
326 14.0
328 13.0
330 13.0
332 30.0
334 30.0
336 30.0
338 30.0
340 30.0
342 32.0
344 36.0
346 39.0
348 42.0
350 44.0
352 49.0
354 49.0
356 51.0
358 52.0
360 52.0
hend
l 13 64 0 0; Meridian blaue Linie durch den Zenit l 13 32 0 0
0 0
0 15
0 30
0 45
0 60
0 75
0 90
180 75
180 60
180 45
180 30
180 15
180 0
; Himmelsrichtungen
i N_for_North 0 1 1
i E_for_East 90 1 1
i S_for_South 180 1 1
i W_for_Worth 270 1 1
end
; The above 'hor' command is an example of a new, useful feature: the
; ability to define your horizon to be a series of alt/az points. You
; start with the command 'hor', followed by the RGB value. Then you have
; a series of alt/az coordinates. These can start at any point on the
; horizon, run either clockwise or counterclockwise, and can either
; continue in a full circle or stop partway (the above example runs from
; azimuth 20 to 180, for example). Use an 'hend' command to stop the
; series of points. You can also add objects, on or above the horizon.
; (In the above example, I added a rocket on the little plateau running
; from azimuth 150 to 155, at 11 degrees altitude.)
"
Konstantin v. Poschinger
Hammerichstr. 5
22605 Hamburg
040/8805747
0171 1983476
Am 15.08.2012 um 22:22 schrieb tom:
> Thanks Josef....that does not seem to work for me...it does not center the
> meridian on the screen.
>
> Tom
>
> ----- Original Message -----
> From: "Josef M�ller" <westerwald-astro@...>
> To: <guide-user@yahoogroups.com>
> Sent: Wednesday, August 15, 2012 3:57 PM
> Subject: Re: [guide-user] Real-time view
>
> > Hi Tom, my ebglish is not good! But I will try!
> >
> > Put an objct center sceen;
> > Click (for xample) NGC 6760;
> > Click "ok";
> > Click "Animation" and "Animation dialog";
> > Click "Real Time";
> > Step size (for exmple) 60 s; Click "ok";
> > All 60s guide will follow!
> > ... if you click finally the douple arrow!
> > Hope this helps!!
> > Josef
> >
> >
> >
> > Am 8/15/2012 6:48 PM, schrieb wa1vta01452:
> >>
> >> Hi,
> >>
> >> I am using Guide 9. Is there an easy way, using the menus, to position
> >> the display to real-time with the constellations showing as they do on
> >> my meridian at any particular time?
> >>
> >> Tom
> >>
> >>
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > To unsubscribe from this group, send an empty email to:
> > guide-user-unsubscribe@egroups.comYahoo! Groups Links
> >
> >
> >
>
>
[Non-text portions of this message have been removed]