Hi Bill,

thanks again. This works. But I found line 34 like this:
34 colors2 aaaaaa ffffff ffffff fcfc00 0000ff 000000 ffffff 0000fc
000000 000000
i.e. the "20" before the color setting was missing. I added it 30 and
now I have a line which a little bit more thick.

Regards

Reinhold


Am 19.11.2011 03:21, schrieb Bill J Gray:

>
>
>
> Reinhold Wittich wrote:
> > Hi Bill,
> >
> > thanks for solving my problem.
> > Is it possible to change the thickness of the line?
> >
> > Regards
> >
> > Reinhold
>
> Yes, it is... though not very straightforward. In fact, the setting
> you had for
> line color was in the right direction. I just tried editing
> 'startup.mar' and resetting
> the color for the CCD frame as
>
> 34 colors2 aaaaaa ffffff ffffff fcfc00 200000ff 000000 ffffff 0000fc
> 000000 000000
>
> '200000ff' represents the CCD frame. The 2 represents the line width;
> the 0 following
> it indicates a solid line style; the '0000ff' after it represents zero
> blue and green
> components and full red intensity. So you get a solid, thick, very red
> line.
>
> After doing this, you can reset the color through the CCD Frame
> dialog. But you're
> stuck with that line thickness, at least until you edit 'startup.mar'
> again.
>
> -- Bill
>
>

[Non-text portions of this message have been removed]