This is good information, but Guide does not offer COM ports higher than 9.
Also, we are attempting to connect two CGE Pro and one CGEM via NexRemote to no avail.
They connect using the handbox, but not via the virtual port on NexRemote. I have tried
ASCOM and the POTH takes over and dominates, not allowing Guide to function.

----- Original Message -----
From: "Hartwig Luethen" <h.luethen@...>
To: <guide-user@yahoogroups.com>
Sent: Monday, February 14, 2011 4:41 PM
Subject: Re: [guide-user] Celestron (and Celestron-compatible) scope control


> Did you figure out what COM port the converter offers you? I found that
> com port numbers >9 do not work.
> If the system gives you com ports >=10, you should delete the unused
> comports, so that you get a proper com number in the end.
>
> Secondly, the NexStar option in Guide does not work with the more
> recent Celestron mounts. Use ASCOM and the Celestron Unified Ascom
> Driver (5.0.23).
>
> Hartwig
>
>
>
>
> Am 14.02.2011 22:21, schrieb P. Clay Sherrod:
>> Sorry, but I am having the same difficulty. The serial port and/or serial converter
>> does
>> not help and I have tried several very reliable converters and even several computers.
>> I
>> am getting the same messages that you are getting and it is not the Serial port or
>> Serial
>> to USB converter. I have ruled out hardware.
>>
>> Dr. Clay
>> _____
>> Arkansas Sky Observatories
>> MPC H45 - Petit Jean Mountain South
>> MPC H41 - Petit Jean Mountain
>> MPC H43 - Conway West
>> http://www.arksky.org/
>>
>> ----- Original Message -----
>> From: "Arild Moland"<astralscooter@...>
>> To:<guide-user@yahoogroups.com>
>> Sent: Monday, February 14, 2011 4:12 PM
>> Subject: Re: [guide-user] Celestron (and Celestron-compatible) scope control
>>
>>
>>> Bill,
>>>
>>> actually, for the time being, I put my money on a faulty Serial to USB
>>> converter. I get a "couldn't open COM port", and "position unread" and
>>> so on when trying either "Slew Guide" or "Slew Scope". I've tried to
>>> set things up using ASCOM as well, and communication just isn't
>>> happening.
>>>
>>> However, I googled a bit and found a recommendation for a Serial to
>>> USB converter from Astronomiser.co.uk, which is supposedly guaranteed
>>> to work for astronomy applications. I've ordered one, and it should be
>>> on its way across the North Sea soon. The main reason I think the
>>> problem to be the cable, is that the ETX control is working, although
>>> erratic. I sometimes get the same messages there.
>>>
>>> I'll get back with my experiences as soon as I've got the cable and
>>> have been able to test things.
>>>
>>> Arild :)
>>>
>>>
>>> ------------------------------------
>>>
>>> To unsubscribe from this group, send an empty email to:
>>> guide-user-unsubscribe@egroups.comYahoo! Groups Links
>>>
>>>
>>>
>>>
>>
>>
>> ------------------------------------
>>
>> To unsubscribe from this group, send an empty email to:
>> guide-user-unsubscribe@egroups.comYahoo! Groups Links
>>
>>
>>
>>
>
>
>
> ------------------------------------
>
> To unsubscribe from this group, send an empty email to:
> guide-user-unsubscribe@egroups.comYahoo! Groups Links
>
>
>
>