Here what might be the problem. Do you use UCAC3? If you do, set the
field to "0 to 0.1" for UCAC3 and see if the star names remains until a
higher level. I bet it does. Common names are shown only for the tycho
catalog therefore when the UCAC3 are on the names are not displayed.

If you have set "0 to 1.5" for UCAC3, names will stop to show after
level 7 (2 degrees), 8 being 1.0 degree UCAC3 showing.


Denis.

On 24/07/2010 3:39 PM, P. Clay Sherrod wrote:
> Thanks Ben and Larry both....
> Very odd circumstance.
>
> Clay
> _____
> Dr. P. Clay Sherrod
> Arkansas Sky Observatories
> MPC H45 - Petit Jean Mountain South
> MPC H41 - Petit Jean Mountain
> MPC H43 - Conway West
> http://www.arksky.org/
>
> ----- Original Message -----
> From: "Ben Hudgens"<bhudgens@...>
> To:<guide-user@yahoogroups.com>
> Sent: Saturday, July 24, 2010 4:35 PM
> Subject: Re: [guide-user] Star names at level 7 and below
>
>
>> Clay,
>>
>> I tried it with Vega all the way down to 1 arc sec field and the name stays displayed.
>> Using the latest update.
>>
>> Ben Hudgens
>>
>> ----- Original Message -----
>> From: Laren Dart
>> To: guide-user@yahoogroups.com
>> Sent: Saturday, July 24, 2010 4:18 PM
>> Subject: Re: [guide-user] Star names at level 7 and below
>>
>>
>>
>> Hi Clay,
>>
>> I just centered on Algol with label on, and the
>> label stayed from 90d field to 15s field.
>>
>> Larry
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>> ------------------------------------
>>
>> To unsubscribe from this group, send an empty email to:
>> guide-user-unsubscribe@egroups.comYahoo! Groups Links
>>
>>
>>
>>
>
>
> ------------------------------------
>
> To unsubscribe from this group, send an empty email to:
> guide-user-unsubscribe@egroups.comYahoo! Groups Links
>
>
>
>