Hi Alferdo

When you click on "Add alignment star" you are telling Guide exactly where your telescope is pointed. Be carefull to have the star in the center of your image. There should not be any movement of your telescope.

Bob Elliott
MPC 762


________________________________________
From: guide-user@yahoogroups.com [guide-user@yahoogroups.com] On Behalf Of alfredo caronia [alfredoc49@...]
Sent: Monday, February 15, 2010 06:40
To: guide-user@yahoogroups.com
Subject: Re: [guide-user] remote control of telescope - Guide 8

Hello Bernd!

Thanks for your answer!


One more question:

- after I clicked on "add alignement star" have I to see some
movement? Because
'I do not know of any change or effect after this command!
Because it is an accuracy of position, is it right that I do not see any
movement?

Bye!

Alfredo Caronia

-


2010/2/15 Bernd Brinkmann <bernd.brinkmann@...>

>
>
> Hello Alfredo,
>
>
> > Now I would like to report a problem: I can point to objects with
> sufficient
> > accuracy, even taking into account that I made the alignment of the
> > telescope with GPS but with only one star!
>
> ok. That's right what you are doing. And you have to do this alignement
> once at
> an observing session.
>
>
> > But, when I click on "Slew Guide", I still get the answer "position
> unread
> > " and then the Guide's map does not show the point where the telescope is
> > pointed!
> > Could you help me to understand the cause of this response?
> >
> > Also I do not understand the function of the command "Add Alignement
> star." How it
> > works and what steps should I take?
>
> The "Add Alignement star" button has the following function: It will
> encrese the
> accuracy of your pointing. Center a star in your eyepiece or ccd, center
> this
> star in Guide and click on "Add Alignement star".
>
>
> > In the future can we use, even for Celestron telescopes, the commands:
> > "Find" and "Center"?
> >
> > Thanks again!
> >
> > Alfredo Caronia
> >
> > 2010/2/15 Bill J Gray <pluto@... <pluto%40projectpluto.com>
> >
> >
> > >
> > >
> > > Hi Alfredo,
> > >
> > > Those 'slew', 'find', 'enter', and 'guide' commands are LX-200
> > > specific. For a Celestron scope, the 'slew Guide' and 'slew telescope'
> > > commands work, but not those four radio buttons.
> > >
> > > -- Bill
>
> Cler skies
>
> Bernd
>
> Bernd Brinkmann
>
> Sternwarte Herne, MPC code A18
> Herne, Germany
>
> e-mail: info@... <info%40sternwarte-herne.de>
> http://www.sternwarte-herne.de
>
>
>

[Non-text portions of this message have been removed]



------------------------------------

To unsubscribe from this group, send an empty email to:
guide-user-unsubscribe@egroups.comYahoo! Groups Links



http://docs.yahoo.com/info/terms/