Hello Bernd!

Thanks for your answer!


One more question:

- after I clicked on "add alignement star" have I to see some
movement? Because
'I do not know of any change or effect after this command!
Because it is an accuracy of position, is it right that I do not see any
movement?

Bye!

Alfredo Caronia

-


2010/2/15 Bernd Brinkmann <bernd.brinkmann@...>

>
>
> Hello Alfredo,
>
>
> > Now I would like to report a problem: I can point to objects with
> sufficient
> > accuracy, even taking into account that I made the alignment of the
> > telescope with GPS but with only one star!
>
> ok. That's right what you are doing. And you have to do this alignement
> once at
> an observing session.
>
>
> > But, when I click on "Slew Guide", I still get the answer "position
> unread
> > " and then the Guide's map does not show the point where the telescope is
> > pointed!
> > Could you help me to understand the cause of this response?
> >
> > Also I do not understand the function of the command "Add Alignement
> star." How it
> > works and what steps should I take?
>
> The "Add Alignement star" button has the following function: It will
> encrese the
> accuracy of your pointing. Center a star in your eyepiece or ccd, center
> this
> star in Guide and click on "Add Alignement star".
>
>
> > In the future can we use, even for Celestron telescopes, the commands:
> > "Find" and "Center"?
> >
> > Thanks again!
> >
> > Alfredo Caronia
> >
> > 2010/2/15 Bill J Gray <pluto@... <pluto%40projectpluto.com>
> >
> >
> > >
> > >
> > > Hi Alfredo,
> > >
> > > Those 'slew', 'find', 'enter', and 'guide' commands are LX-200
> > > specific. For a Celestron scope, the 'slew Guide' and 'slew telescope'
> > > commands work, but not those four radio buttons.
> > >
> > > -- Bill
>
> Cler skies
>
> Bernd
>
> Bernd Brinkmann
>
> Sternwarte Herne, MPC code A18
> Herne, Germany
>
> e-mail: info@... <info%40sternwarte-herne.de>
> http://www.sternwarte-herne.de
>
>
>

[Non-text portions of this message have been removed]