alfredo caronia Feb 12, 2010
>[Non-text portions of this message have been removed]
>
> Hello Alfredo,
>
>
> > Use of Guide 8! I bought a Telescope Celestron CPC 925 XLT!
> > Via cable I am able to control the movements of the telescope with the
> software
> > Guide 8! I can only move the telescope to the North, South, East or West!
> > I wanted to know if there is a function that gives the chance to stake ,
> for
> > example, a star through the software and to click on the star ( or on
> other
> > celestial object ) and then moving the telescope to the same star!
> > In this case, what actions and steps should I do? Thank you!
>
> in |Settings|Scope control| click on the COM port the telescope is
> connected to
> and try LX-200 or NexStar mode. Then you will see a new entry in the
> toolbar
> called "Scop Pad" (I assume you are using english language in Guide). After
> the
> telescope is aligned you can refine the alignement by centering the same
> star in
> Guide and the eyepiece (or ccd) and clicking on "Add Alignement star".
> After this you center the object you want to see in Guide and click on
> "Slew
> telescope" or if you want to know what object is in your fov click on "Slew
>
> Guide".
>
> Hope this helps and clear skies
> Bernd
>
> Bernd Brinkmann
>
> Sternwarte Herne, MPC code A18
> Herne, Germany
>
> e-mail: info@... <info%40sternwarte-herne.de>
> http://www.sternwarte-herne.de
>
>
>