Hello Alfredo,

> Use of Guide 8! I bought a Telescope Celestron CPC 925 XLT!
> Via cable I am able to control the movements of the telescope with the software
> Guide 8! I can only move the telescope to the North, South, East or West!
> I wanted to know if there is a function that gives the chance to stake , for
> example, a star through the software and to click on the star ( or on other
> celestial object ) and then moving the telescope to the same star!
> In this case, what actions and steps should I do? Thank you!

in |Settings|Scope control| click on the COM port the telescope is connected to
and try LX-200 or NexStar mode. Then you will see a new entry in the toolbar
called "Scop Pad" (I assume you are using english language in Guide). After the
telescope is aligned you can refine the alignement by centering the same star in
Guide and the eyepiece (or ccd) and clicking on "Add Alignement star".
After this you center the object you want to see in Guide and click on "Slew
telescope" or if you want to know what object is in your fov click on "Slew
Guide".

Hope this helps and clear skies
Bernd

Bernd Brinkmann

Sternwarte Herne, MPC code A18
Herne, Germany

e-mail: info@...
http://www.sternwarte-herne.de