Re: [guide-user] Time Change Problem

P. Clay Sherrod Nov 7, 2009

Hi Tom....
You are correct: my mistake. Open the small file Guide.txt and you should see the
designation. You can change the time default by using the Alt-J command and entering
T=x, where "x" is the value that you need to adjust to.

However, I would do that as a last resort and assure that all other time and date
settings, etc. are set correctly.

Dr. Clay
_____
Arkansas Sky Observatories
MPC H45 - Petit Jean Mountain South
MPC H41 - Petit Jean Mountain
MPC H43 - Conway West
http://www.arksky.org/

----- Original Message -----
From: "Tom Campbell" <thcamp@...>
To: <guide-user@yahoogroups.com>
Sent: Saturday, November 07, 2009 1:56 PM
Subject: Re: [guide-user] Time Change Problem


> Dr. Clay,
>
> I opened my strings text file under my Guide 8 "text" folder and I do
> not see any line that has "T=0", "T=1" in the entire file. I first
> searched this long text file manually using Notepad and then I did its
> search/find function on these key words. These time defaults appear not
> to exist in my "strings" settings text lines. Am I looking in the wrong
> place or is there a patch available online that I may have overlooked?
>
> Thanks,
>
> Tom
>
> P. Clay Sherrod wrote:
>>
>>
>> My Guide changed over the last Sunday of October and I had to go into
>> the Guide."Strings"
>> settings and change my time default to T=0.
>> This was a problem a year ago and some of us had to adjust to T=1
>> which now sets the clock
>> up an hour.
>>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> To unsubscribe from this group, send an empty email to:
> guide-user-unsubscribe@egroups.comYahoo! Groups Links
>
>
>
>
>