Thanks Bill!

Ed

--- In guide-user@yahoogroups.com, Bill J Gray <pluto@...> wrote:
>
> Hi Ed,
>
> You should be all set with your 'push to' scope.
>
> You'll have to go into Settings... Scope Control and specify that you're
> using a Sky Commander and the serial port to which it is attached. The
> Sky Commander will have to have been set up (turned on and aligned and,
> of course, connected to the PC.)
>
> At that point, you should be able to get the target indicator to
> show up, and can push the scope around and see that indicator move
> as it ought to. That function will work Just Fine. Only the 'slew
> scope' function will fail (no motors to slew).
>
> -- Bill
>