Nothing to it....it will be recognized instantly by Guide once you plug the interface
cable into Gemini. There should be nothing more needed to do; typically you can run the
GM-11 via both the LX200 command link on the Telescope control on Guide or select the
Gemini mode....either will work.

Dr. Clay
_____
Arkansas Sky Observatories
MPC H45 - Petit Jean Mountain South
MPC H41 - Petit Jean Mountain
MPC H43 - Conway West
http://www.arksky.org/

----- Original Message -----
From: "Jerry Bialozynski" <jbialozynski@...>
To: <guide-user@yahoogroups.com>
Sent: Tuesday, March 17, 2009 3:27 PM
Subject: [guide-user] Guide 8 & a Losmandy G-11 Mount w/Gemini


> I'm controlling a LX-200 with Guide 8 and have now procured a Losmandy G-11 w/Gemini
> mount. I vaguely remember it not being very difficult at all to set up my computer to
> talk to the LX-200 and control its movements. Is the G-11 just as easy? If someone out
> there has this same mount and is driving it using Guide 8, could please walk me through
> the steps to get my laptop talking to the mount. The laptop has a serial port and I have
> a serial to RS-232 cable.
>
> Thanks in advance,
> Jerry
>
>
>
> ------------------------------------
>
> To unsubscribe from this group, send an empty email to:
> guide-user-unsubscribe@egroups.comYahoo! Groups Links
>
>
>