Thanks John: That solved the problem!

Ed

--- In guide-user@yahoogroups.com, "larkerer" <larkerer@...> wrote:
>
>
> Hiya Ed
>
> "Show At" is in degrees, ie the field size of the level you are on
> (well, the vertical size, it's usually wider of course coz screens
> ain't square).
>
> So, if you have "show at" 1 to 9, you show at fields of 1 degree to 9
> degrees, and if you zoom in closer than 1 degree, you don't show 'em.
>
> Your first number should be zero for nearly everything really.
>
> As you zoom in you get smaller fields, so it's a kind of inverse thing
> too, 1 isn't level 1, which is 180 degrees if I remember rightly, but
> 1 degree, which is probably about level 7 on default settings.
>
> Cheers
>
> John
>
> --- In guide-user@yahoogroups.com, "Ed Wiley" <edwiley@> wrote:
> >
> > Hi Bill and other forum members:
> >
> > I have a curious problem, perhaps simply my misunderstanding of
> > toggling users databases or other things I am still learning about
> > Guide8.
> >
> > Example: WDS. Settings "On" or "Automatic" or "fixed" plus "Label" and
> > "Show at" set to "1-9" or "1-10"
> >
> > at Level 7 I get nice labels for all the doubles in the field.
> > However, I loose the lables at levels 8 and higher.
> >
> > I suspect it has something to do with "show at," but I have never
> > quite understood what this means? Show at levels 1-9?
> >
> > Thanks in advance for any advice!
> >
> > Ed
> >
>