Hiya Ed

"Show At" is in degrees, ie the field size of the level you are on
(well, the vertical size, it's usually wider of course coz screens
ain't square).

So, if you have "show at" 1 to 9, you show at fields of 1 degree to 9
degrees, and if you zoom in closer than 1 degree, you don't show 'em.

Your first number should be zero for nearly everything really.

As you zoom in you get smaller fields, so it's a kind of inverse thing
too, 1 isn't level 1, which is 180 degrees if I remember rightly, but
1 degree, which is probably about level 7 on default settings.

Cheers

John

--- In guide-user@yahoogroups.com, "Ed Wiley" <edwiley@...> wrote:
>
> Hi Bill and other forum members:
>
> I have a curious problem, perhaps simply my misunderstanding of
> toggling users databases or other things I am still learning about
> Guide8.
>
> Example: WDS. Settings "On" or "Automatic" or "fixed" plus "Label" and
> "Show at" set to "1-9" or "1-10"
>
> at Level 7 I get nice labels for all the doubles in the field.
> However, I loose the lables at levels 8 and higher.
>
> I suspect it has something to do with "show at," but I have never
> quite understood what this means? Show at levels 1-9?
>
> Thanks in advance for any advice!
>
> Ed
>