Interesting!

I think I know what going on.

It's seem the bug, is related to the satellite name, of all things.

Why, while using guide to get pass info, I notice the pass data was
the same, even if I changed the satellite to use. As long as the
satellite had the same name, the info stayed the same.

Yet if I changed the name, of one of the sat's in the file used, then
ran quide and checked the pass info, it changed:)

For example

I used

APT 2.6 4.3 0.0 5.0 d
1 27821U 03024B 07126.51846716 .00003188 00000-0 29992-3 0 9526
2 27821 049.5800 172.3688 5175353 246.7630 051.8781 05.36999994
75993
APT 2.6 4.3 0.0 5.0 d
1 28116U 03056E 07125.00172157 -.00000170 00000-0 -24155-4 0 6897
2 28116 053.0313 039.1987 5778745 275.2764 025.0174 04.28975069 53184

in a text file, for guide to use. You load it using "setting", and
look for TLE

Then in another text file I used

27821 2.6 4.3 0.0 5.0 d
1 27821U 03024B 07126.51846716 .00003188 00000-0 29992-3 0 9526
2 27821 049.5800 172.3688 5175353 246.7630 051.8781 05.36999994 75993
28116 2.6 4.3 0.0 5.0 d
1 28116U 03056E 07125.00172157 -.00000170 00000-0 -24155-4 0 6897
2 28116 053.0313 039.1987 5778745 275.2764 025.0174 04.28975069 53184

Oh ya!

Kevin