Re: [guide-user] Re: Only few asteroids without use of MPCORB

Laurent Zimmermann Jun 18, 2006

Hi Bill,


I also use the 29 May 2006 version and I have no problem with the asteroids.
Even if I enter a name or number in the dialog "Go to an asteroid".

Unlike Bertrand, when I have downloaded an update, I always unzip _all_ the
files to my Guide directory. Existing files are always overwritten. I never
lost any setting or personalization.

Also I copied the two CD-ROM to my hard disk, rather than using "Install to
hard drive...". Of course, I adapted Startup.mar accordingly (18 drive
C:\GUIDE8\).

I used MPCORB a long time ago and then I erased the .DAT file (mpcorb.lim
29.07.2004 remains). I just downloaded MPCORBcr.dat. Then "Use MPCORB" was
no more greyed out and I checked it. Everything was normal. I unchecked and
Guide continued tu run normally.


Laurent

----- Message d'origine -----
De : "Bertrand Laville" <bertrand.laville@...>
À : <guide-user@yahoogroups.com>
Envoyé : dimanche 18 juin 2006 08:11
Objet : Re: [guide-user] Re: Only few asteroids without use of MPCORB


> Hi Bill,
>
> Here is my contribution to this problem:
>
> - Quick info is OK.
> "Currently visible asteroids to magnitude 11" gives me presently 10
> asteoroids, from (1) Ceres to (354) Eleonora.
> If I click on anyone of these ten, Guide goes to the right one, with "X"
> (cross), number and name on the center of the screen. If I click on "X",
> the infow window is OK, and the "more info" window also.
>
> - Table of current asteroids
> Through this way also, all is OK. I can choose the magnitude limit, and
> Guide shows a table with as asteroids as the magnitude limit is down. If i
> click on any, all is OK as above.
>
> - Extra/Use MPCORB is grayed out
>
> - Goto/Asteroid shows me the usual small window, but if I write, say,
> ""Ceres, or "1", or any other name or number, Guide tells me: "not an
> asteroid".
>
> I use the 29 May 2006 version, but, as most of my files are customized, I
> have downloaded and replaced (as I do for each update) only the files that
> have been created of modified after the release of the previous version.
>
> Hope this might be helping you.
>
> Bertrand
>
>
> ----- Original Message -----
> From: Bill J Gray
> To: guide-user@yahoogroups.com
> Sent: Saturday, June 17, 2006 7:22 PM
> Subject: Re: [guide-user] Re: Only few asteroids without use of
> MPCORB_,__
>
> [Non-text portions of this message have been removed]
>
>
>
>
> To unsubscribe from this group, send an empty email to:
> guide-user-unsubscribe@egroups.com
> Yahoo! Groups Links
>
>
>
>
>
>
>
>