Denis,

This is a great program you have put together! I spent several
hours working with it tonight and I am very impressed with it.

At this point the major question I have concerns how to zoom in and
out on the star map. I notice that the program always defaults to a
80 degree field of view. I can zoom in and out using the mouse but
sometimes it doesn't seem to work as I expected. Is there a simple
way to get a 180 degree field of view with the local zenith at the
center and the horizon appearing as a circle around it? Also, I
notice that some of the constellation figure lines seem to extend
back to the upper left when you zoom out too far.

Thanks again for a great piece of work.

--- In guide-user@yahoogroups.com, Denis <denis.boucher@t...> wrote:
> I am sorry to have mislead some people. Let me clarify. The
program will
> work under both Framework versions. You must have one of the
versions
> installed. I will amend my web pages. I have tested the program
under
> v1.1 and it works fine. Something I should have done earlier. My
> confusion came from using VS.net 2002 which requires v1.0 only and
will
> not work with v1.1.
>
> Yes, both versions can actually be installed and co-exist on your
> system. The program will look for 1.0 but will use 1.1 if it does
not
> exist. The difference between the versions is little. v1.1 has
added
> features for mobile,IP a few others.
>
>
> Bill,
>
> the program uses your SGP4/SDP4 codes. Minor changes were needed
to
> adapt to vb.net. I have also tried making all my function codes
and
> SGP4/SDP4 into a C++ compiled dll which I access with the program,
work
> just fine.
>
> Denis
>
>
> toadatrix wrote:
> > I am correct that Microsoft .NET Framework 1.0 (actually 1.0a)
must
> > be installed? In other words, is it true that your program
will NOT
> > work with the latest .NET Framework 1.1? Are you saying that
both
> > 1.0 and 1.1 can be installed on the same machine at the same
time and
> > not cause any problems? Thanks.
> >
> > --- In guide-user@yahoogroups.com, Denis <denis.boucher@t...>
wrote:
> >