At 10:45 2/24/00 -0001, Bernd wrote:
>Hello Guide users,
>
>I also have massive problems with Guide 7.0 Vers. 30.01.00:
>- the CCD-frame isn't displayed correctly when centering: from the left
upper
>corner of the CCD-frame there are lines to the left upper corner of the
guide
>window
Hi Bernd.
I have seen the same problem with the CCD frame (lines from upper left of
CCD to upper left of guide screen). One solution is to back down in size
one or two steps until the CCD frame is again displayed correctly and then
go up to the size you want. Another solution I tried was to get a new
computer after too many years with a 66MHz 486. That hasn't completely
solved the problem though. I still on occasion get the strange looking CCD
frame.
Bob Elliott
750 Fall Creek