> It seems that the listing in the comet box from the "Go to" menu change
> depending on the settings we set to display comets. The first time I looked

at

> that box, the listing show 4 comets. I changed from "auto" to "on" the

setting

> to display comets in "data shown" and now the comet box in the "Go to" menu

is

> displaying a lot of them. I've changed back the setting to "auto" and set the
> display to level 1 (full sky) and the only comet visible is Ikeya-Zhang. So,
> the comet box is now listing only this comet.

When you turn the Comets "On" you get all of the comets in the list.
On "AUTO" it depends on what you have the brightness level set at, (Look at the
numbers when you are in "DATA SHOWN").

>
> P.S. it seems that we cannot save many locations in the "Settings...

Location"

> box... nobody give me feedback :-( So, I have to change it manually each

time?

>

Use "SAVE MARK" to save the settings for different locations.

Use "SAVE MARK" to save any specific setting you choose. Save one especially
for your regular set-up so you can easily come back with the same settings.

Larry Wood