Hi Bill,

That is where I got them from; then just transferred a copy to a ucac4 folder inside the Guide. Maybe they got corrupted in the download!

I will try the copy Christoph is sending me first, if that does not work I will download files again using a different ftp program.

Kind regards,

Keith

Hi Christoph,  Keith,  all,

    The UCAC-4 files are at

ftp://cdsarc.u-strasbg.fr/cats/I/322A/UCAC4/u4b/

    They do add up to about 8 GBytes;  they were initially distributed

on two DVDs.  Or maybe a double-sided DVD.

-- Bill

On 2016-09-12 13:34, christoph held cheld93@... [guide-user] wrote:

Keith, at this moment I compressed the files. Unfortunately my Dropbox is limited to 2.5

GB so I must split the zip and then upload it piece by Piece.

Best I write to you when I´ve uploaded a Piece and then you tell me when you´ve

downloaded it so i can Exchange. Best you write me to:

cheld93 at yahoo.de

----------------------------------------------------------------------------------------

*Von:* "Keith Pascall tilehouseobservatory@... [guide-user]"

<guide-user@yahoogroups.com>

*An:* guide-user@yahoogroups.com

*Gesendet:* 19:25 Montag, 12.September 2016

*Betreff:* Re: [guide-user] RE: Problems with UCAC4 and USNO B1.0

Hi Christoph,

That would be very kind of you - if you are sure it would not be too much trouble -

there are a lot of files, something like 8Gb!

Please feel free to reply direct to my email address

tilehouseobservatory@...

<mailto:tilehouseobservatory@...>  if you wish, to keep any detail more

private.

Kind regards,

Keith

On 12/09/2016 18:04, christoph held cheld93@... <mailto:cheld93@...>

[guide-user] wrote:

Hi Keith,

sorry for the bad links. Two weeks in advance it works.

If you are interested i can upload my UCAC Files in my Drobbox.

Christoph

----------------------------------------------------------------------------------------

*Von:* "Keith Pascall tilehouseobservatory@...

<mailto:tilehouseobservatory@...> [guide-user]"

<guide-user@yahoogroups.com> <mailto:guide-user@yahoogroups.com>

*An:* guide-user@yahoogroups.com <mailto:guide-user@yahoogroups.com>

*Gesendet:* 18:58 Montag, 12.September 2016

*Betreff:* Re: [guide-user] RE: Problems with UCAC4 and USNO B1.0

Hi Dr. Clay and Christoph,

Have tried full path  UCAC4_PATH=C:\Program Files (x86)\GUIDE91\ucac4  but it makes no

difference. The URAT1 files are in the same place and work with the short path.

Unfortunately the web pages you quote either gives a blank page or 'page can not be

found' error depending on browser used. It looks like the files have been removed but

I do begin to suspect something is wrong with the files I downloaded.

Thank you for your suggestions, I will try and find another source to download from.

Kind regards,

Keith

On 12/09/2016 17:36, christoph held cheld93@... <mailto:cheld93@...>

[guide-user] wrote:

Hi Keith!

I´ve had the same problems with the downloaded data from CDS.

The files should be faulty. Then I´ve downloaded from this source:

http://www.tcmt.org/data/ucac/UCAC4.7z.001

to

http://www.tcmt.org/data/ucac/UCAC4.7z.018

Now it works.

Kind regards

Christoph

----------------------------------------------------------------------------------------

*Von:* "'P. Clay Sherrod' drclay@... <mailto:drclay@...>

[guide-user]" <guide-user@yahoogroups.com> <mailto:guide-user@yahoogroups.com>

*An:* guide-user@yahoogroups.com <mailto:guide-user@yahoogroups.com>

*Gesendet:* 18:10 Montag, 12.September 2016

*Betreff:* Re: [guide-user] RE: Problems with UCAC4 and USNO B1.0



It appears that your path route is not complete:

UCAC4_PATH=ucac4

It needs to be directed to the complete drive that your GUIDE folder (in which your

UCAC-4 resides)....such as

UCAC4_PATH=C:\GUIDE8\ucac-4

For example.

------------

Dr. Clay

Arkansas Sky Observatories

WEB:  www.arksky.org/ <http://www.arksky.org/>

FACEBOOK:  https://www.facebook.com/groups/421163751426836/

ASO Petit Jean Mountain /MPC H41

ASO Petit Jean Mountain South /MPC H45

ASO West Conway /MPC H43

.......serving astronomy since 1971

____________________

    ----- Original Message -----

    *From:* Keith Pascall tilehouseobservatory@... [guide-user]

    <mailto:tilehouseobservatory@...%20[guide-user]>

    *To:* guide-user@yahoogroups.com <mailto:guide-user@yahoogroups.com>

    *Sent:* Monday, September 12, 2016 10:58 AM

    *Subject:* Re: [guide-user] RE: Problems with UCAC4 and USNO B1.0

    Hi Grant,

    Basically not having use this method before and some research on the internet.

    I have, however, downloaded a program called Tixati (which looked fairly simple

    to use) and tried it briefly. This method seems to be the only way to get a copy

    of usno-B1.0 which is all I want to use it for.

    I have left off trying that at the moment because I can not get the downloaded

    ucac4 files to display in Guide 9.1

    I downloaded ucac4 via ftp from cdsarc.u-strasbg.fr site

    Files z001 to z900 (exactly as downloaded) were placed in a directory 'ucac4'

    inside Guide 9.1 (10 Dec 2015 version).

    File ucac4.tdf (from recent group email) added to Guide 9.1

    Added new line to guide.dat   UCAC4_PATH=ucac4

    Extras - Toggle user datasets shows UCAC-4 is 'on' and 'Show at' reads '0  1.5'

    Label is ticked.

    No UCA4 stars show up at any level of display or can be found with a search.

    URAT1 is set up in exactly the same way and works ok.

    Can anybody suggest what I might have done wrong or missed?

    Do I need to process the downloaded files in any way?, I can find no instruction

    to do so.

    Regards,

    Keith

    On 12/09/2016 13:29, 'Blair, Grant' g.blair@... <mailto:g.blair@...>

    [guide-user] wrote:

    Keith,

    Why would you consider the use of BitTorrent to be ‘a bit risky without use of a

    VPN’?  Unless you plan on doing something on (or beyond) the margins of legality

    (software or media piracy), torrents are an excellent way to distribute large

    files or datasets, sharing the load over many, many clients with available

    bandwidth.

    Grant

    *From:*guide-user@yahoogroups.com <mailto:guide-user@yahoogroups.com>

    [mailto:guide-user@yahoogroups.com]

    *Sent:* Sunday, September 11, 2016 8:55 AM

    *To:* guide-user@yahoogroups.com <mailto:guide-user@yahoogroups.com>

    *Subject:* Re: [guide-user] Problems with UCAC4 and USNO B1.0

    Hi Christoph,

    Thank you for the info and apologies for not getting you name correct in my

    previous email.

    I have never used the 'Bittorrent' system for downloading and have read that it

    is a bit risky without having a VPN set up also.

    Did you use a VPN for your download?

    Kind regards,

    Keith

    On 11/09/2016 12:53, christoph held cheld93@... <mailto:cheld93@...>

    [guide-user] wrote:

        Hi Keith,

        take this:

        https://www.ap-i.net/skychart/en/news/usno-b1.0_catalog

        Kind regards,

        Christoph

        ----------------------------------------------------------------------------------------

        *Von:*"Keith Pascall tilehouseobservatory@...

        <mailto:tilehouseobservatory@...> [guide-user]"

        <guide-user@yahoogroups.com> <mailto:guide-user@yahoogroups.com>

        *An:* guide-user@yahoogroups.com <mailto:guide-user@yahoogroups.com>

        *Gesendet:* 13:45 Sonntag, 11.September 2016

        *Betreff:* Re: [guide-user] Problems with UCAC4 and USNO B1.0

        Hi Christopher,

        I have been looking to download the USNO B1.0 catalogue but can not find a

        site where it is available'.

        Are you able to disclose from where you downloaded a copy?

        Kind regards,

        Keith

        On 03/09/2016 09:41, christoph held cheld93@...

        <mailto:cheld93@...> [guide-user] wrote:

            Dear Bill!

            Thanks for your help. That works great. And sorry for double posting.

            kind regards

            Christoph

            ----------------------------------------------------------------------------------------

            *Von:*"Bill Gray pluto@... <mailto:pluto@...>

            [guide-user]" <guide-user@yahoogroups.com>

            <mailto:guide-user@yahoogroups.com>

            *An:* guide-user@yahoogroups.com <mailto:guide-user@yahoogroups.com>

            *Gesendet:* 20:11 Montag, 29.August 2016

            *Betreff:* Re: [guide-user] Problems with UCAC4 and USNO B1.0

            Hi Christop,

            My apologies; you've been led astray by some documentation that I need

            to update.

            If you get these two files :

            http://www.projectpluto.com/usno_b1.tdf

            http://www.projectpluto.com/ucac4.tdf

            and put them in your Guide folder, you'll see "UCAC-4" and "USNO B1.0

            from hard drive" in your Extras... Toggle User Dataset lists.

            Those files were provided as part of the Guide 8 update file, and

            they're present on the Guide 9 and 9.1 DVDs. But they are _not_

            automatically installed from the Guide 9.x disk.

            Incidentally, a note to first-time posters on this list: it may take

            a little while before your first post is approved. After that, you won't

            be moderated, and your posts will appear almost instantly. This list used

            to be completely unmoderated, but that resulted in spam.

            -- Bill

            On 2016-08-29 08:02, christoph held cheld93@...

            <mailto:cheld93@...> [guide-user] wrote:

            >

            >

            > Hallo to you all!

            >

            > I´ve a problem with displaying the UCAC4 and USNO B1.0 Stars. I have

            downloaded both

            > Catalogue. The UCAC4 folder contains the z001 to z900 files and the

            B1.0 folder

            > b0000.acc to b1799.acc files and the same as .cat. I´ve also set the

            path to the folders

            > in the way describte on the projectpluto page:

            > http://www.projectpluto.com/update8d.htm#b1_from_hard_drive

            > but nothings happened!

            > There is no new entry in the toggle user datasets.

            > What I make wrong? Please help me.

            >

            > Thank you

            >

            > Christoph

            >

            >

            >

------------------------------------

Posted by: Bill Gray <pluto@...>

------------------------------------

To unsubscribe from this group, send an empty email to:

guide-user-unsubscribe@egroups.com

------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:

    http://groups.yahoo.com/group/guide-user/

<*> Your email settings:

    Individual Email | Traditional

<*> To change settings online go to:

    http://groups.yahoo.com/group/guide-user/join

    (Yahoo! ID required)

<*> To change settings via email:

    guide-user-digest@yahoogroups.com 

    guide-user-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:

    guide-user-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:

    https://info.yahoo.com/legal/us/yahoo/utos/terms/